Cart (0)
Sub Total: Tk 0

N.B. Image may differ with actual product's layout, color, size & dimension. No claim will be accepted for image mismatch. Product data used in this website is based solely on its manufacturer provided information, authenticity and accuracy are their responsibility only.

Hikvision DS-3E1518P-EI/M 18 Port Managed Smart PoE Switch

Product Id: 29.05.485.35

Brand Hikvision

Coming Soon

Quick Overview

  • Type - Network Switch
  • Number of Total Port - 18 Port
  • PoE - Yes
  • Manageability - Managed
  • Network Standards - IEEE 802.3af, IEEE 802.3at
  • Data Transfer Rate - 10/100/1000 Mbps
  • Form Factor - Rackmount
  • Body Color - Gray
General
Brand
Hikvision

Model
Hikvision DS-3E1518P-EI/M

Type
Network Switch


Ports & Slots
Number of Total Port
18 Port

Gigabit Port
18 Port

SFP Port
No

SFP+ Port
No

PoE Port
16

PoE+ Port
No


Technical Info
PoE
Yes

Manageability
Managed

Interface(s)
16 x 10/100/1000 Mbps PoE, 1 x 10/100/1000 Mbps Ethernet, 1 x 10/100/1000 Mbps Fiber Optical

Network Standards
IEEE 802.3af, IEEE 802.3at

Data Transfer Rate
10/100/1000 Mbps

Switching Capacity
56 Gbps


Physical Description
Indicators
PWR Indicator, PoE-MAX Indicator, Gigabit RJ45 Port Indicator, Gigabit SFP Fiber Optical Port Indicator, LINK/ACT IndicatorPoE Indicator

Body Material
Metal

Body Color
Gray

Form Factor
Rackmount

Dimension
440.0 x 44.0 x 220.8mm

Weight
2.7 kg


Power
Power Supply
100~240 V AC, 50/60 Hz, Max. 2.5 A

Approx. Power Consumption
150W


Warranty
Warranty
1 Year (Without Adapter)


Additional Info
Others
Operating Temperature 0 Degree C to 45 Degree C, Storage Temperature -40 Degree C to 85 Degree C, Operating Humidity 5% to 95% (no condensation), Relative Humidity 5% to 95% (no condensation) Installation Mode Rack (equipped with mounting ears), Max. Power Consumption 150 W, Power Consumption in Idle 20 W, Surge Protection 6 kV, MAC Address Table 8 K, Packet Forwarding Rate 41.66 Mpps, Internal Cache 4.1 Mbits, PoE Power Pin 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-), PoE Port PoE: Ports 1 to 16, Max. Port Power 30 W, PoE Power Budget 130 W, Long Range Ports 1 to 16: up to 300 m. Long range performance may vary depend on camera model or cable condition. Port Isolation Ports 1 to 18: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. PoE Watchdog Ports 1 to 16: auto detect and restart the cameras that do not respond. Link Aggregation Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups. QoS QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP and WRR priority scheduling modes. Loop Prevention Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Support 802.1w RSTP. VLAN VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN. HPP Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.

Specialty
System Maintenance Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a configurable IP address (default: 10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Support 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating. DHCP Snooping DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default. Approval: EMC, Safety, Chemistry CE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006).

Country Of Origin
China

Made in/ Assemble
China


N.B. Specification may differ with actual product. In that case, Ryans will execute full refund within 5 days.

Details

QUESTION & ANSWER

Customer Questions

No questions asked yet.

Your Question (Please don`t use any links, &, (, ), /, +, $, # Symbols)

REVIEW

Customer Reviews

No reviews given yet.

Your Review

Similar Products

WhatsApp