Others
Output Frequency (sync to mains): 50Hz/ 60Hz (+-10Hz), Topology: Double conversion online, Waveform type: Sine wave, Crest factor: 3:1, Output voltage distortion: <=1 THD (linear load), <=3 THD (non-linear load), Mains to bypass: less than 4ms transfer rate, Input voltage: 208V/ 220V/ 230V/ 240V, Power factor: >=0.99, Efficiency: Full load efficiency 94.5% @ 220VAC (AC mode), Full load efficiency 89.5% @ 36VAC (Battery), 1.0A Charge current (Battery), Typical recharge time: 4-5 hours recover to 90% capacity, Communication & management: Load Capability: Load 102%-110% last 30min, Load 110%-130% last 10min, Load 130%-150% last 30s, Load more than 150% 300ms (AC), Load 102%-110% last 1min, Load 110%-130% last 10s, Load 130%-150% last 3s, Load more than 150% 200ms (Battery), Control panel: LCD status display sith load, battery, input, output, operating mode information, Operating Temperature: 0 degree C - 40 degree C, Storage Temperature: -25 Degree - 55 Degree C, Relative 0-95% (non-condensing), Audible noise: less than 55db (1 meter from surface), Interface: RS232, USB.
Specialty
High frequency double conversion online with DSP control. Supply utility power to the connected loads in the event of a UPS power overload or fault. Give higher application availability by correcting poor frequency and voltage conditions. Provide notification of changing utility power and UPS power conditions. Provides temporary battery power when the utility power is out. Quickly understand unit and power status with control panel. Support economic operation mode for energy saving. Wide input voltage range for main operations. Extend runtime with extra battery modules.